● 结前帮，中底及鞋面不必先行擦胶，不但节省人工，而且成型后加热永不脱胶，确保完美之形状。
● 全能束紧器及特别轨迹的扫刀，保证结帮后，鞋面均匀贴紧楦头，绝对不发角，增进美观，提高质量。
● 九爪独立式可个别调整配合任何形状之鞋头结帮，其自动平衡及扫刀前进时自动下降的原理，更是提抽品质增加产量的特性。
● 辅助扫刀结构：辅助扫刀是配合九爪式前帮使转头结帮长度加长到前中衔接转角处，经此结帮后，可使鞋头之皮面更贴合于鞋楦。
● 胶盘大小可调式结构：一般使用自动上胶之前帮胶盘均匀为固定式，不可任意调整，此大小可调整结构为适应大小号鞋子生产线上，同时混合生产时、不需要动用工具而可简单快速的调整胶盘的大小、宽度以使着胶点能随大小号鞋子涂在适当之位置，使黏着效果更为完美，而同一型体之鞋子也不必因量多而更换胶盘。
● 扫刀具有寸动及调速功能，使结帮控制的调整作业更为方便。
● 本机附有十字投影灯装置，方便鞋头校正作业，同时使新手更容易操作。
● 爪子为快速拆装结构，可于30秒内换装完成。
● 内撑台上升高度，由外部遥控调整，并提供数字提示参考，使操作更方便。
● 各机构之压力与速度均可由外部调整，压力表亦配置在机台外部，使机械操作与调整更方便。
● 爪盘大小快速调整结构：爪盘采用双轨迹结构，左右分开独立位移调整。其旋转原点则不受空间限制，设定于中爪及第二爪之衔接处，故左右爪组于快速调整大小时，和中爪之弧型位置，绝不会改变，可使鞋面上夹紧时更贴楦头，确保结帮质量。
型号 机械尺寸（长宽高） 包装尺寸（长宽高） 重量 产量 动力
qf-737a 1700*1000*1950mm 1800*1160*2100mm 1100kg 1500～1800pairs/8hrs 2hp
qf-737b 1700*1000*1950mm 1800*1160*2100mm 1100kg 1500～1800pairs/8hrs 2hp
second-ranking knot before help, insole and vamp without first wipe glue, not only save artificially, but after molding heating never degum, ensure perfect shape.
second-ranking all-around constrictive traps and special track after saul knife, ensure lasting, vamp uniform tiejin xuantou, absolutely not hair angle, improve the beautiful, improves the quality.
second-ranking nine claw freestanding may be separately adjustment with any shape of shoes, its automatic head lasting balance and esau knife forward the principle of automatic falling, but also mention smoke quality increase output characteristics.
second-ranking auxiliary esau blade structure: auxiliary sweep with nine claw type knife is for make turned lasting length before prior to lengthen cohesive corner, through this lasting, can make shoes head after the leather face more joint at last.
second-ranking glue plate adjustable structure: generally use automatic gluing evenly injector before help for stationary, cannot adjust, this resizable structure to adapt to the size shoes production line, and mixed production, do not need to use tools and simple quickly adjust glue plate size, width to make the glue point can change with size shoes besmear in proper place, make gelling effect more perfect, and the same type of the body shoes don\'t because of much and replace glue disk volume.
second-ranking esau cutter has inch dynamic and speed adjustment function, make lasting control adjustment homework more convenient.
this machine is with the projector lamps machine, convenient shoes head correction device homework, and make the novice easier to use.
second-ranking claws for fast disassembly structure, can be in 30 seconds outfit completed.
higher level within the second-ranking supports taiwan by external remote adjustment, and provide digital hint, operation more convenient reference.
each institution of the second-ranking pressure and speed are controlled by external adjustment, pressure gauges also configuration in their tool external, make mechanical operation and adjust more convenient.
second-ranking claw discs size, quick adjustment structure: the claw discs adopt double track structure, about the separate displacement adjustment. its rotation origin does not accept dimensional restriction, set in claws and second claw, so the cohesion place around in big claws group quick adjustment, and in the hour claws arc position, never change, can make the vamp clamping when more stick xuantou, ensure lasting quality.
models of mechanical sizes (dimensions) packing size (dimensions) weight output power
qf - 737a 1700 * 1000 * * * 1950mm 1800 11.6 2100mm 1100kg 1500 ~ 1800pairs / 8hrs 2hp in spiral
qf - 737b 1700 * 1000 * * * 1950mm 1800 11.6 2100mm 1100kg 1500 ~ 1800pairs / 8hrs 2hp in spiral
'
东莞市厚街钜隆鞋机店
张贵龙
13925890055
东莞市厚街镇，寮厦新村南路7号QQ:735884824